Brushless Outrunners


14mm 5gm Micro Brushless Motor (2500Kv)

This motor is ideal for indoor models of 50g-70g auw. With only 5.2gms weight and 20w of power it spins a 4x2.5 to 5x3 prop giving 80gm of thrust.

Motor is supplied with a motor mount and prop saver adapter; other prop adapters can be found here. Suitable connectors for motor/ESC are available here

- e.g. 0.8mm or 2mm

bullet connectors or 3 pin 2mm space plug/socket.

Max current:3A
Size:14mm dia, 25mm long (incl mount & shaft)
Weight:5.2g
Shaft dia:1.5mm
Recommended cell count:2s Lipo
Recommended prop:5x4.3

£ 11.95

18mm 10gm Micro Brushless Outrunner

This motor is ideal for indoor or lightweight outdoor models (e.g. the Stevens Aero 'Diddle' and Parkscale Whim ranges). With only 9.2gms weight and a decent 40w of power it spins a 6x5 to 7x3.5 props with ease gives 140gm of thrust.

Motor is supplied with a motor mount and prop saver adapter; other prop adapters can be found here. Suitable connectors for motor/ESC are available here - e.g. 0.8mm or 2mm bullet connectors or 3 pin 2mm space plug/socket. Some batches of these motors have 2mm male bullet connectors fitted to the motor leads, but no matching female connectors in the package.

The motor mount grub screw requires a 1.27mm hex key and the grub screw in the end-bell securing the shaft requires a 0.9mm hex key.

KV:1500, 2000, 2900, or 3800 RPM/V
Max current:6A
Size:18mm dia, 30mm long (incl mount & shaft)
Weight:10g
Shaft dia:2mm
Recommended cell count:2s Lipo
Recommended prop:7x6 to 8x4.3 (1500Kv), 6x5 to 7x3.5 (2000Kv), 4x2.5 to 5x5 (2900Kv), 3x3 to 4x4 (3800Kv)


AP02 2g Micro Brushless Motor

A 2g motor designed for single LiPo cell operation. A GWS 3x2 prop gives 27g thrust at 1.8A.

Suitable connectors for motor/ESC are available here - e.g. 0.8mm or 2mm bullet connectors or 3 pin 2mm space plug/socket.

Kv:7000 RPM/V
Weight:2.3g (including the triangle motor mount and wires)
Diameter:13mm
Length:8mm
Shaft diameter:1.5mm
Battery:1S (3.7V)
Max continuous current:2A
Peak current:10 seconds @ 2.5A
Suggested prop:2.5x0.8 - 3x2
Thrust Data:
PropCurrentThrust
2.5x0.80.9A19g
3x21.8A27g

£ 17.45

AP03 Micro Brushless Motor

A superb 3g outrunner for 1S (7500Kv) or 2S (4000Kv) operation. Ballraced shaft for smooth running and long life. Ultra-light stator for fast response - ideal for micro-sized 3D models.

The GWS 3" props are a tight push fit onto the AP03 1.5mm shaft, a reamer is available. The GWS 4" props require a prop adapter: either the push-on collet adapter or the prop saver. Suitable connectors for motor/ESC are available here - e.g. 0.8mm or 2mm bullet connectors or 3 pin 2mm space plug/socket.

Weight:3.1g (including the mount and wires)
Diameter:13mm
Length:9mm
Shaft diameter:1.5mm
Shaft length:6mm
Kv:7500 RPM/V4000 RPM/V
Battery:1S (3.7V)2S (7.4V)
No load current:0.3A at 3.5V0.1A at 7V
Max continuous current:3A2A
Peak current:5 sec @ 4A10 sec @ 2.5A
7500Kv:
PropVoltageCurrentThrust
3x23.51.9A40g
3x23.72.1A44g
3x24.02.4A50g
4000Kv:
PropVoltageCurrentThrust
3x27.01.6A58g
3x27.41.7A61g


AP05 Micro Brushless Motor

A 5g motor designed for 1S and 2S operation with winds of 5000Kv and 3000Kv. With a GWS 5x3 prop, the 3000Kv motor gives 45g thrust on 1S or 110g on 2S.

The AP05 is supplied with a prop saver adapter. The push-on collet adapter may also be used for a rigid prop mounting (suitable for GWS 4" and 5" props).

Suitable connectors for motor/ESC are available here - e.g. 0.8mm or 2mm bullet connectors or 3 pin 2mm space plug/socket.

Weight:5.4g (including the triangle motor mount and wires)
Diameter:13mm
Length:14mm
Shaft diameter:1.5mm
Kv:3000 RPM/V5000 RPM/V
Battery:1S or 2S1S
No load current:0.3A at 7.0V0.4A at 3.5V
Max continuous current:3A5A
Peak current:5 sec @ 4A10 sec @ 6A
3000Kv:
PropVoltsCurrentThrust
4x2.53.5V0.9A32g
4x2.57V2.2A87g
5x33.5V1.2A45g
5x37V2.8A110g
5000Kv:
PropVoltsCurrentThrust
5x33.7V4.5A90g

A pack of 10 o-rings for the AP05 prop saver is available: £ 1.15


Firewall Mount for APxx Motors

A three part firewall mount for APxx micro motors (AP02, AP03 and AP05). Lightness and strength is provided by the ply-balsa-ply sandwich construction. The mount kit includes 3 self tapping screws.

£ 1.25

A1504-18 (2900Kv)

A micro motor suitable for small light indoor models this is a very popular motor designed for use on two LiPo cells. Similar in size, weight and power to the E-flite Park 180.

  • Number of Cells: 2-3s LiPo
  • Max Efficiency Current: 2-4A
  • Max Current: 5A/60s
  • Max Efficiency: 75%
  • Shaft Size: 2.0mm
  • Poles: 14
  • Weight: 13g
  • Max watts: 55W
  • Motor Dimensions: 18x12 (mm)
  • Minimum Recommended ESC: 6A
  • Recommended prop size on 2s: GWS 4530 (4.5x3) or 5030 (5x3)

£ 12.50

AX1806 2100Kv

A good motor for the slightly larger/heavier park flyer. Run on 2S or 3S, max power 80W. 22mm diameter, 3mm shaft, weight 19g. Recommended prop: (2S) 6x3, (3S) 5x3.

£ 9.25

BL1510-2200

A small brushless outrunnier ideal for parkfly models conversions weighing up to 230g/8oz on 2S and up to 400g/14oz on 3S.

  • Number of Cells: 2-3s LiPo
  • Max Efficiency Current: 6-7A
  • Max Current: 7.5A
  • Shaft Size: 2.0mm
  • Poles: 14
  • Weight: 17g
  • Max watts: 90W
  • Motor Dimensions: 18x28 (mm)
  • Minimum Recommended ESC: 10A
  • Recommended prop size: 2S GWS 7035 (7x3.5); 3S GWS 5030 (5x3)
  • £ 12.50

    © Micron Radio Control