Mountain Models


Mountain Models Droplet

The Droplet is a micro R/C balsa easy-flying aeroplane kit. The Droplet is perfect for indoor flying venues or those calm summer evenings outdoors. With a flying weight of 1.1 ounces and a wing loading of 2.2 oz per square foot, "The Droplet" is an easy flying model. Or, punch the throttle and hold on to your socks!

The Droplet is built from laser cut contest grade balsa and plywood, with all hardware you need to complete the kit. The guts from a ParkZone P-51 or Sukhoi drop right into the Droplet, or you can buy the parts separately.

Specifications:
  • Wingspan: 20.8 in
  • Length: 14.6 in.
  • Wing Area: 60 sq in
  • Weight: 1.1 oz Ready To Fly
  • Loading: 2.2 oz/sq ft
  • Controls: 3 - rudder, elevator, throttle
  • Power: ParkZone P51/Sukhoi (PKZ3624)
  • RX/ESC/Servos: ParkZone 2.4GHz DSM2 (P51/Sukhoi 'brick') or Spektrum AR6400
  • 1S-130 LiPo
  • Piloting: Easy to fly
Kit Contents:
  • Laser Cut interlocking contest grade/weight balsa and plywood parts
  • Pushrods, landing gear, wheels, control horns, etc.
Items Needed to Complete:
  • Power: ParkZone P51/Sukhoi (PKZ3624)
  • RX/ESC/Servos: ParkZone 2.4 GHz DSM2 (P51/Sukhoi 'brick') or Spektrum AR6400
  • Battery: 1S-130 LiPo
  • Propeller: 130x70mm (PKZ3601)
  • Covering: So-Lite covering film and SolarTrim for covering trim details
Tools Needed:
  • Hobby knife and blades
  • Ruler
  • Needle-nose Pliers
  • Thin and Thick CA
  • Soldering Iron
  • Sandpaper (400 grit)



£ 26.40

Mountain Models Roland c.II Walfisch

The Roland C.II Walfisch was one of the most advanced aircraft when it first appeared in March 1916. It featured a sleek, streamlined wooden fuselage that gave rise to its name of "Walfisch". Another novel innovation was the lack of cabane struts, instead the upper wing sat on top of the fuselage giving an uninterrupted view of the sky above.

The Mountain Models cartoon scale version of the Roland C.II Walfisch was designed using a state of the art 3D CAD package, to allow for exceptional laser cut interlocking parts design and fit. 3D design also provides clearer assembly images, without having to use photos.

The Roland C.II Walfisch, laser cut airplane kit, is built from self-jigging interlocking laser cut balsa and plywood parts. It's like a 3D jigsaw puzzle with instructions. Although not needed for building, full size plans are included for reference. If the instructions are read before hand and followed during the build, the Roland C.II Walfisch can be built up and ready to fly in only a few evenings.

Download the build manual.

Specifications:
  • Wingspan: 13.4 in
  • Length: 12.4 in
  • Wing Area: 78 sq in
  • Flying Weight: 1.4 oz
  • Wing Loading: 2.6 oz/sq ft
  • Controls: 3 (Rudder, Elevator, Throttle)
  • Power: ParkZone P51/Sukhoi motor/gearbox (PKZ3624)
  • RX/ESC/Servos: ParkZone 2.4GHz DSM2 (P51/Sukhoi 'brick') or Spektrum AR6400
  • 1S-130 LiPo
Kit Contents:
  • Laser cut balsa and plywood parts
  • Pushrods, landing gear, wheels, control horns, etc.
Items Needed to Complete:
  • Power: ParkZone P51/Sukhoi (PKZ3624)
  • RX/ESC/Servos: ParkZone 2.4 GHz DSM2 (P51/Sukhoi 'brick') or Spektrum AR6400
  • Battery: 1S-130 LiPo
  • Propeller: 130x70mm (PKZ3601)
  • Covering: So-Lite covering film
Tools Needed:
  • Hobby knife and blades
  • Ruler
  • Needle-nose Pliers
  • Thin and Thick CA
  • Soldering Iron
  • Sandpaper (400 grit)



£ 33.60

© Micron Radio Control