Micron Radio Control : Park Scale Wisp Kits

The Monocoupe 90 was a light, fabric covered, two seat cabin aircraft built by Donald Luscombe in 1927. A total of 324 aircraft were produced frrom 1928 until the late 1940's.

The kit design comprises fully inter-locking parts making a full size plan unnecessary. Take a look at the assembly manual which is included with the kit.

A number of options for Park Scale Wisp Series Monocoupe 90a may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.

Motor:

detail

Propeller:

The PKZ3901 prop has a 1mm centre hole; this needs reaming out to 1.4mm so that it can be screwed onto the PKZ3624 shaft.

Micro J-3 Cub Prop with Spinner (PKZ3901): +£1.80 ea, quantity:

Receiver:

AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel. The Futaba and Spektrum Micro receiver options comprises separate receiver and servos. Installation differs from that shown in the instructions for Vapor and AR64xx receivers - the servos are mounted on the fuselage wall using the supplied servo mounting tape.

detail

LiPo:

LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.

detail

Glue:

Deluxe Materials Roket Hot - 20g: +£5.03
Deluxe Materials Roket Rapid - 20g: +£5.03
Deluxe Materials Micro Tips and Tube: +£5.22
Deluxe Materials 4 Min Speed Epoxy - 71gm (2.5oz): +£8.55

Kit Price: £ 28.80 Total Price (incl options): £ 28.80

The de Havilland Canada DHC-2 Beaver is a single-engined, high-wing, propeller-driven, STOL aircraft developed by de Havilland Canada. Primarily known as a bush plane, the Beaver has been used for cargo and passenger hauling, crop dusting and and has been widely adopted by armed forces around the world as a utility aircraft. A total of 1,657 aircraft were produced from 1947 to 1967.

The kit design comprises fully inter-locking parts making a full size plan unnecessary. Take a look at the assembly manual which is included with the kit.

Kit Price: £ 28.80 Total Price (incl options): £ 28.80

Parkzone P-51 Motor / Gearbox (PKZ3624)

Replacement 8.5mm coreless motor and gearbox for Parkzone Micro P-51D. Gearbox output shaft is 1.5mm with a threaded end. Motor is fitted with 2 pin 1.27mm spacing connector.

CL-0820-15-9T with Gearbox

The excellent CL-0820-15-9T 8.5mm motor in a PKZ3527 gearbox. Ideal replacement for the PKZ3624 in 'UM' type models. Gearbox output shaft is 1.5mm with a threaded end. Motor is fitted with 2 pin 1.27mm spacing connector and the lead is 115mm.

Microaces 8.5mm Motor / Gearbox

A high performance 8.5mm coreless motor and gearbox. A drop-in replacement for the Parkzone PKZ3624. Weighs approx 6.5g. Motor is fitted with 2 pin 1.27mm spacing connector.

Micro J-3 Cub Prop with Spinner (PKZ3901)

Replacement prop and spinner for the Parkzone UM J-3 Cub. Size: 100mm diameter, 60mm pitch. Fits the PKZ3928 gearbox. Can be used on the PKZ3624 motor/gearbox by reaming out the centre hole with a 1.4mm drill. Can be used on the PKZ3624 motor/gearbox by reaming out the centre hole with a 1.4mm drill.

Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)

Replacement receiver module for the Parkzone Vapor, now supporting DSMX as well as DSM2. The module features two on-board linear servos and a 1.5A brushed motor ESC. Dimensions: (WxLxH): 27.75 x 23.45 x 8.10mm, Weight: 3.3g.

AR6400-Like DSM2 Receiver Module

A 6 channel DSM2 receiver/servo/ESC module - almost identical to the AR6400 in mechanical and performance specification but not manufactured by Spektrum. Dimensions (WxLxH): 27.75 x 23.45 x 8.10mm, Weight: 3.9 gram

AR6410-Like DSM2/DSMX 6CH Ultra Micro-Rx

This micro 6-channel receiver is the same size and function as a AR6410. It has 2 on-board linear servos and a 2A brushed speed controller. Supports both DSMX and DSM2 protocols. Dimensions (WxLxH): 27.75 x 23.45 x 8.10mm, Weight: 4.9 gram

MXL-RX6H-B1 Futaba S-FHSS Receiver Module

A 5 channel Futaba S-FHSS receiver/servo/ESC module. Two onboard linear servos (rudder and elevator), 2A brushed ESC, battery lead with 'UM' 1.25mm pitch socket and JST-SH sockets for 2 external servos (aileron and reverse aileron). Connection for external ESC via pad on circuit board or optional JST-SH socket. Dimensions (WxLxH): 24.5 x 22.5 x 8.0mm, Weight: 3.9gm (incl battery lead).

Micro Spektrum DSM2/DSMX Receiver & 2 x 1.4g Linear Servo

A micro single cell 7 channel 2.4GHz receiver, compatible with Spektrum DSM2/DSMX plus 2 x 1.4g linear servos. Built-in 2A brushed ESC with 2 pin 1.27mm pitch socket, 'UM' battery lead and 4 x JST-SH sockets for aileron, elevator, throttle and rudder. Weight: 4gm

Micro Futaba S-FHSS Receiver & 2 x 1.4g Linear Servo

A micro single cell 7 channel 2.4GHz receiver, compatible with Futaba S-FHSS plus 2 x 1.4g linear servos. Built-in 2A brushed ESC with 2 pin 1.27mm pitch socket, 'UM' battery lead and 4 x JST-SH sockets for aileron, elevator, throttle and rudder. Weight: 4gm

Hyperion G3 130mAh 1S (3.7V) 25C

These are a major upgrade for Eflite, Kyosho Minium and Parkzone Etomic series micro RC models, and fit without modification. With Hyperion's G3 technology inside, they deliver more mA per gram than the stock batteries, while sustaining higher voltage under high loads, for greatly improved power performance. Of course, like all Hyperion G3 LiPo they last for hundreds of cycles, with consistent performance, when properly charged and stored.

Hi-Energy 130mAh 1S (3.7V) 30C (2 pack)

Capacity:	130 mAh
Max Continuous Current:	3.9A
Size:	42 x 11 x 7.5 mm
Weight:	4 gm

Hi-Energy 160mAh 1S (3.7V) 30C (2 pack)

Capacity:	160 mAh
Max Continuous Current:	4.8A
Size:	41 x 11 x 5 mm
Weight:	4.5 gm

Hyperion G3 160mAh 1S (3.7V) 50C

Deluxe Materials Roket Hot - 20g

Super-thin, crystal clear, penetrating adhesive. Sets in 1 to 5 seconds.

Deluxe Materials Roket Rapid - 20g

Medium viscosity, fast setting adhesive. Sets in 5 to 10 seconds.

Deluxe Materials Micro Tips and Tube

Pack of six micro tips and teflon tubing for precise anti-clog application of superglues.

Deluxe Materials 4 Min Speed Epoxy - 71gm (2.5oz)

Featuring high strength, a rapid 4 min setting time and formulated to set hard, clear & sandable. The new formula uses epoxy and hardener systems carefully matched to give high strength across gaps at 1:1 ratio, and yet tolerate slight mixing errors found in normal use.