Micron R/C is
open on Mondays, Tuesdays and Fridays. For further details, see
*** Please read this notice
if your shipping address is outside the U.K. ***
Home > DT DSM2 Ultra Micro RX > Land RxServo Rx | Actuator Rx | 'v5' Land Rx | High Voltage Land Rx | Railway Layout Controlother pages: 'V5' Explained | 'Selecta' Explained
DT / DelTang DSM2 Micro Receivers for Land Based Models
UK designed and manufactured DSM2 ultra micro 2.4GHz receivers. All of these receivers are fully compatible with Spektrum, E-flite, Parkzone and other DSM2/DSMX 2.4GHz transmitters and transmit modules. These receivers are not copies of Spektrum products. A low-power transmit module Tx1 is also available.
The land based receivers are designed for R/C control of boats, cars and trains (several train type controllers are available: Tx21, Tx22 and Tx23)/. The receivers have at least one built-in reversible brushed ESC and are highly configurable for driving actuators, servos, LEDs and low-current switched channels.
The 'v5' receivers are especially small, are designed for low voltage (up to 6V) operation and have 1-4 reversible ESC and 2 x 2A forward only ESC. The reversible ESC have various current ratings - see the receiver spec for details. The 2 x single direction ESC may be combined to provide an additional reversible ESC channel. The 'v5' receivers are small enough to be fitted into N Gauge locomotives.
The 'Rx6x' receivers are for high voltage operation (up to 16V for Rx60/61 and 13V for Rx63) and have a single reversible ESC plus multiple servo or switched outputs. These receivers employ an ATMega328 microcontroller which may be reconfigured with the Arduino bootloader to enable execution of custom control code. Versions of 'Rx6x' receivers pre-configured with the Arduino bootloader will be available soon as will example source code.