Wow your friends with this vintage styled pint sized ultra-micro aerobat. The RingRat (RC-050) is based upon our popular nostalgic control line trainer. Now re-engineered to fly off-lines using today's popular ultra-micro electronics. This classic aerobat is well suited for small outdoor flying sites and large indoor venues.
Designed for the Spektrum AR6400 receiver modules.
RingRat 050 is a full-house (rudder, elevator, aileron) model and very aerobatic.
The kit includes:
Precision Laser Cut Hand Selected Balsa and Hardwood Components
Pre-cut Vinyl Windscreen
Landing Gear Hardware
Ultra-Light Wheel Set
Tail Skid
Aileron Bell Crank, Control Horns, and Control Linkage
Parkzone PKZ3624 (P-51 Motor/Gearbox) plus EFL9051 (micro 4-Site prop)
Aileron Servos:
Spektrum AS2000 or similar
Battery:
120mAh-160mAh single cell
Pilot Skill Level:
Intermediate
Builders Skill Level:
Beginner
Options:
A number of options for Stevens Aero RingRat 050 may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.
The Futaba option comprises separate receiver and servos. Installation differs from that shown in the instructions for Spektrum receivers - the servos are mounted on the fuselage wall using the supplied servo mounting tape.
AR6400-Like DSM2 Receiver Module
£25.60
AR6410-Like DSM2/DSMX 6CH Ultra Micro-Rx
£27.95
Micro Futaba S-FHSS Receiver & 2 x 1.4g Linear Servo
LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.
The original Pacemaker was designed by JL Sadler in 1940 and is indeed a unique "old timer" design with a beautiful profile and elegant wing shape. Inspired by the 1940 original, the Stevens AeroModel Pacemaker kit features state of the art construction techniques that you've come to expect.
The kit includes:
Precision laser cut hand selected balsa components
150mAh or 160mAh 3.7V LiPo with UM compatible connector
E-Flite EFL9051 Propeller
Specification:
Recommended Flying Site:
Gymnasium
Airframe Type:
Basic Trainer
Control Layout:
3 Channel R/E/T
Wing Span:
27.25"
Wing Area:
100 sq in.
Length:
18.75"
Flying Weight:
2oz
Loading:
3.5 oz/sq ft
Receiver:
Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410 (Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Power Unit:
Parkzone PKZ3624 (P-51 Motor/Gearbox) plus EFL9051 (micro 4-Site prop)
Battery:
120mAh-160mAh single cell
Pilot Skill Level:
Beginner
Builders Skill Level:
Beginner
Options:
A number of options for Stevens Aero Pacemaker 100, Nostalgic RC Old Timer may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.
AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel. The Futaba and Spektrum Micro receiver options comprises separate receiver and servos. Installation differs from that shown in the instructions for Vapor and AR64xx receivers - the servos are mounted on the fuselage wall using the supplied servo mounting tape.
Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)
+£48.45
MXL-RX6H-A1 DSM2/DSMX Receiver Module
+£28.45
MXL-RX6H-B1 Futaba S-FHSS Receiver Module
+£28.45
Micro Spektrum DSM2/DSMX Receiver & 2 x 1.4g Linear Servo
+£31.35
Micro Futaba S-FHSS Receiver & 2 x 1.4g Linear Servo
LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.
The nostalgic lines of Stevens Aero Ace (100) are presented with a strong nod to Henry Struck and his 1940’s vintage New Ruler and American Ace free flight designs. This modern laser-cut kit is delivered with the finest stock materials and features a beginner friendly interlocking assembly – greatly improving your building experience.
The kit includes:
Precision laser cut hand selected balsa components
150mAh or 160mAh 3.7V LiPo with UM compatible connector
E-Flite EFL9051 Propeller
Specification:
Recommended Flying Site:
Gymnasium
Airframe Type:
Basic Trainer
Control Layout:
3 Channel R/E/T
Wing Span:
24"
Wing Area:
100 sq in.
Length:
17.5"
Flying Weight:
2.25oz
Loading:
3.2 oz/sq ft
Receiver:
Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410 (Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Power Unit:
Parkzone PKZ3624 (P-51 Motor/Gearbox) plus EFL9051 (micro 4-Site prop)
Battery:
120mAh-160mAh single cell
Pilot Skill Level:
Beginner
Builders Skill Level:
Beginner
Options:
A number of options for Stevens Aero Ace 100, Nostalgic RC Old Timer may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.
AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel. The Futaba and Spektrum Micro receiver options comprises separate receiver and servos. Installation differs from that shown in the instructions for Vapor and AR64xx receivers - the servos are mounted on the fuselage wall using the supplied servo mounting tape.
Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)
+£48.45
MXL-RX6H-A1 DSM2/DSMX Receiver Module
+£28.45
MXL-RX6H-B1 Futaba S-FHSS Receiver Module
+£28.45
Micro Spektrum DSM2/DSMX Receiver & 2 x 1.4g Linear Servo
+£31.35
Micro Futaba S-FHSS Receiver & 2 x 1.4g Linear Servo
LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.
Playmite (75) is a pint-sized package that is bursting at the seams with nostalgic charm. This compact (75 square inch) micro R/C model aeroplane kit, designed for the ParkZone PKZ3352 ultra micro electronics; offers opportunity to fly both indoors, at the local gymnasium, or bop from roof-top to roof-top outdoors in the late evening lift.
There's something about these classy polyhedral / pylon ships of yesteryear that just strike a chord with old timer enthusiasts world-wide. Though there were hundreds of iterations of the basic pylon design that circulated through the budding model aircraft industry, most enthusiasts seem to identify with the Playboy which saw prolific distribution through Cleveland Models. The Stevens Aero Playmite design is directly inspired by this iconic model and, while reminiscent of those bygone years, offers a modern package that builds quick, straight, and true thanks to modern design and tooling processes pioneered by Stevens AeroModel.
The kit includes:
Precision laser cut hand selected balsa and hardwood components
Hardware package including push-rods, control horns, replica motor, and solid hub plastic wheels
Specification:
Recommended Flying Site:
Gymnasium
Airframe Type:
Basic Trainer
Control Layout:
3 Channel R/E/T
Wing Span:
22.5"
Wing Area:
75 sq in.
Length:
13"
Flying Weight:
1.75oz
Loading:
1.4 oz/sq ft
Receiver:
Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410 (Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Power Unit:
Parkzone PKZ3624 (P-51 Motor/Gearbox) plus EFL9051 (micro 4-Site prop)
Battery:
120mAh-160mAh single cell
Pilot Skill Level:
Beginner
Builders Skill Level:
Beginner
Options:
A number of options for Stevens Aero Playmite (75) "Toon Playboy" may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.
AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel. The Futaba and Spektrum Micro receiver options comprises separate receiver and servos. Installation differs from that shown in the instructions for Vapor and AR64xx receivers - the servos are mounted on the fuselage wall using the supplied servo mounting tape.
Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)
+£48.45
MXL-RX6H-A1 DSM2/DSMX Receiver Module
+£28.45
MXL-RX6H-B1 Futaba S-FHSS Receiver Module
+£28.45
Micro Spektrum DSM2/DSMX Receiver & 2 x 1.4g Linear Servo
+£31.35
Micro Futaba S-FHSS Receiver & 2 x 1.4g Linear Servo
LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.
Nostalgic lines reminiscent of the venerable Quaker free flight model line. Stevens Aero reduced this flying classic to 100 square inches and added a touch of "Toon" charm. Well behaved and easy to fly indoors and out! Designed to be flown using popular 2.4GHz ultra micro electronics from the ParkZone line of model aircraft or the Spektrum AR6400 receiver module.
The QuickOats 100 kit includes a full-size plan with instructions. You may also download the comprehensive assembly manual and photo supplement.
Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410 (Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Power Unit:
Parkzone PKZ3624 (P-51 Motor/Gearbox) plus EFL9051 (micro 4-Site prop)
Battery:
120mAh single cell (EFLB1201S)
Pilot Skill Level:
Beginner
Builders Skill Level:
Beginner
Options:
A number of options for Stevens Aero QuickOats 100 may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.
AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel. The Futaba and Spektrum Micro receiver options comprises separate receiver and servos. Installation differs from that shown in the instructions for Vapor and AR64xx receivers - the servos are mounted on the fuselage wall using the supplied servo mounting tape.
Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)
+£48.45
MXL-RX6H-A1 DSM2/DSMX Receiver Module
+£28.45
MXL-RX6H-B1 Futaba S-FHSS Receiver Module
+£28.45
Micro Spektrum DSM2/DSMX Receiver & 2 x 1.4g Linear Servo
+£31.35
Micro Futaba S-FHSS Receiver & 2 x 1.4g Linear Servo
LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.
Graced with nostalgic lines of free-flight models of yesteryear. This modern laser cut model airplane kit accepts today's most popular ultra-micro systems by Spektrum, ParkZone, and E-Flite. With a flying weight under 2 oz. the Rockette is ideally suited for sorties in the sports hall or garden.
Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410 (Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Power Unit:
Parkzone PKZ3624 (P-51 Motor/Gearbox) plus EFL9051 (micro 4-Site prop)
Battery:
120mAh single cell (EFLB1201S)
Pilot Skill Level:
Beginner
Builders Skill Level:
Beginner
Options:
A number of options for Stevens Aero Rockette 100 "Toon Rocketeer" may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.
AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel. The Futaba and Spektrum Micro receiver options comprises separate receiver and servos. Installation differs from that shown in the instructions for Vapor and AR64xx receivers - the servos are mounted on the fuselage wall using the supplied servo mounting tape.
Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)
+£48.45
MXL-RX6H-A1 DSM2/DSMX Receiver Module
+£28.45
MXL-RX6H-B1 Futaba S-FHSS Receiver Module
+£28.45
Micro Spektrum DSM2/DSMX Receiver & 2 x 1.4g Linear Servo
+£31.35
Micro Futaba S-FHSS Receiver & 2 x 1.4g Linear Servo
LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.
The BuzzBomb 100 is a reduced version of the vintage free-flight classic Buzzard Bombshell and, while it echoes the lines of the championship wining predecessor, the construction, styling, and flight control is refreshingly modern. The BuzzBomb 100 is slow enough to be flown indoors yet equally a delight to pilot outside on dawn or evening patrol. The BuzzBomb 100 has been designed to readily accept the abundant and affordable ParkZone Ultra-Micro indoor electronics.
The beginner friendly airframe assembles in a matter of hours, and the simple attractive lines are a breeze to cover. To ensure builder success the thoughtful design and materials selection is backed by a thorough step-by-step instruction manual, clear drawings and downloadable photo supplement.
Specification:
Recommended Flying Site:
Gymnasium
Airframe Type:
Basic Trainer
Control Layout:
3 Channel R/E/T
Wing Span:
21"
Wing Area:
100 sq in.
Length:
16"
Flying Weight:
1.8oz (66gm)
Loading:
2.6 oz/sq ft
Receiver:
Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410 (Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Power Unit:
Parkzone PKZ3624 (P-51 Motor/Gearbox) plus EFL9051 (micro 4-Site prop)
Battery:
120-160mAh single cell
Pilot Skill Level:
Beginner
Builders Skill Level:
Beginner
Options:
A number of options for Stevens Aero BuzzBomb 100 "Toon Buzzard" Micro Flyer may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.
AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel. The Futaba and Spektrum Micro receiver options comprises separate receiver and servos. Installation differs from that shown in the instructions for Vapor and AR64xx receivers - the servos are mounted on the fuselage wall using the supplied servo mounting tape.
Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)
+£48.45
MXL-RX6H-A1 DSM2/DSMX Receiver Module
+£28.45
MXL-RX6H-B1 Futaba S-FHSS Receiver Module
+£28.45
Micro Spektrum DSM2/DSMX Receiver & 2 x 1.4g Linear Servo
+£31.35
Micro Futaba S-FHSS Receiver & 2 x 1.4g Linear Servo
LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.
Replacement 8.5mm coreless motor and gearbox for Parkzone Micro P-51D. Gearbox output shaft is 1.5mm with a threaded end. Motor is fitted with 2 pin 1.27mm spacing connector.
The excellent CL-0820-15-9T 8.5mm motor in a PKZ3527 gearbox. Ideal replacement for the PKZ3624 in 'UM' type models. Gearbox output shaft is 1.5mm with a threaded end. Motor is fitted with 2 pin 1.27mm spacing connector and the lead is 115mm.
A high performance 8.5mm coreless motor and gearbox. A drop-in replacement for the Parkzone PKZ3624. Weighs approx 6.5g. Motor is fitted with 2 pin 1.27mm spacing connector.
A 6 channel DSM2 receiver/servo/ESC module - almost identical to the AR6400 in mechanical and performance specification but not manufactured by Spektrum. Dimensions (WxLxH): 27.75 x 23.45 x 8.10mm, Weight: 3.9 gram
This micro 6-channel receiver is the same size and function as a AR6410. It has 2 on-board linear servos and a 2A brushed speed controller. Supports both DSMX and DSM2 protocols. Dimensions (WxLxH): 27.75 x 23.45 x 8.10mm, Weight: 4.9 gram
Micro Futaba S-FHSS Receiver & 2 x 1.4g Linear Servo
A micro single cell 7 channel 2.4GHz receiver, compatible with Futaba S-FHSS plus 2 x 1.4g linear servos. Built-in 2A brushed ESC with 2 pin 1.27mm pitch socket, 'UM' battery lead and 4 x JST-SH sockets for aileron, elevator, throttle and rudder. Weight: 4gm
A micro long throw linear servo with 2 x ball-bearings. Designed for single LiPo cell operation and supplied with 60mm lead and JST-SH plug. Compatible with Spektrum AR6410 and DT Rx33.
The operating force is 45g and the speed is 0.14s at 4.2V for a linear travel of 10mm.
These are a major upgrade for Eflite, Kyosho Minium and Parkzone Etomic series micro RC models, and fit without modification. With Hyperion's G3 technology inside, they deliver more mA per gram than the stock batteries, while sustaining higher voltage under high loads, for greatly improved power performance. Of course, like all Hyperion G3 LiPo they last for hundreds of cycles, with consistent performance, when properly charged and stored.
These are a major upgrade for Eflite, Kyosho Minium and Parkzone Etomic series micro RC models, and fit without modification. With Hyperion's G3 technology inside, they deliver more mA per gram than the stock batteries, while sustaining higher voltage under high loads, for greatly improved power performance. Of course, like all Hyperion G3 LiPo they last for hundreds of cycles, with consistant performance, when properly charged and stored.
Featuring high strength, a rapid 4 min setting time and formulated to set hard, clear & sandable. The new formula uses epoxy and hardener systems carefully matched to give high strength across gaps at 1:1 ratio, and yet tolerate slight mixing errors found in normal use.
Finishing pack for the Stevens Aero RingRat 050. Package comprises two SoLite 315mm x 700mm Patch Packs in Red and Yellow to finish the model as shown in the photo.
Replacement receiver module for the Parkzone Vapor, now supporting DSMX as well as DSM2. The module features two on-board linear servos and a 1.5A brushed motor ESC. Dimensions: (WxLxH): 27.75 x 23.45 x 8.10mm, Weight: 3.3g.
A 5 channel DSM2/DSMX receiver/servo/ESC module. Two onboard linear servos (rudder and elevator), 2A brushed ESC, battery lead with 'UM' 1.25mm pitch socket and JST-SH sockets for 2 external servos (aileron and reverse aileron). Connection for external ESC via pad on circuit board or optional JST-SH socket. Dimensions (WxLxH): 24.5 x 22.5 x 8.0mm, Weight: 3.9gm (incl battery lead).
A 5 channel Futaba S-FHSS receiver/servo/ESC module. Two onboard linear servos (rudder and elevator), 2A brushed ESC, battery lead with 'UM' 1.25mm pitch socket and JST-SH sockets for 2 external servos (aileron and reverse aileron). Connection for external ESC via pad on circuit board or optional JST-SH socket. Dimensions (WxLxH): 24.5 x 22.5 x 8.0mm, Weight: 3.9gm (incl battery lead).
Micro Spektrum DSM2/DSMX Receiver & 2 x 1.4g Linear Servo
A micro single cell 7 channel 2.4GHz receiver, compatible with Spektrum DSM2/DSMX plus 2 x 1.4g linear servos. Built-in 2A brushed ESC with 2 pin 1.27mm pitch socket, 'UM' battery lead and 4 x JST-SH sockets for aileron, elevator, throttle and rudder. Weight: 4gm
Finishing pack for the Stevens Aero Pacemaker. Package comprises a sheet of vinyl decals plus SoLite 315mm x 700mm Patch Packs in Red (2) and White (1) to finish the model as shown in the photo.
Finishing pack for the Stevens Aero Ace 100. Package comprises a sheet of vinyl decals plus SoLite 315mm x 700mm Patch Packs in Red (1) and Cream (2) to finish the model as shown in the photo.
Finishing pack for the Stevens Aero Playmite 75. Package comprises one each SoLite 315mm x 700mm Patch Packs in Red and Cream (Antique White) to finish the model as shown in the photo.
