Stevens Aero Micro Models - Whimsy (Sport)


Stevens Aero LiddleBug 2.4

A 'micro' version of the DiddleBug designed for the Parkzone Vapor or Spektrum AR6400 receiver modules.

The LiddleBug's retro old-timer design echoes fond memories of childhood free flight models. The original Liddlebug for actuator based R/C is still available.

Beginners will appreciate this affordable design, simple single surface wing, low parts count, and self jigging fuselage that builds straight every time. The gentle handling LiddleBug will not spin and stalls are always clean, predictable, and straight ahead. Slow speed, wide flight envelope, and forgiving handling keeps the new pilot from trouble and the low mass, durable, all balsa construction makes encounters with the ground a non-event. Should you find your LiddleBug requires repair; damage is easily fixed at the field in seconds with thin CA glue.

Advanced pilots will enjoy relaxing low and close in flying encounters with their LiddleBug. The LiddleBug's retro old-timer design echoes fond memories of childhood free flight models. The clean lines, small size, and flight characteristics will garner all sorts of attention wherever you and your Bug go!

Recommended Flying Site:Gymnasium
Airframe Type:Basic Trainer
Control Layout:3 Channel R/E/T
Wing Span:20"
Wing Area:55 sq in.
Length:12.5"
Flying Weight:0.81oz
Loading:2.1 oz/sq ft
Receiver:Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410 (Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Power Unit:Parkzone PKZ3327 & PKZ3316 (Vapor Gearbox & Motor) plus PKZ3302 (Vapor prop)
Battery:70mAh Vapor battery (PKZ3001)
Pilot Skill Level:Beginner
Builders Skill Level:Beginner

A number of options for Stevens Aero LiddleBug 2.4 may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.

Motor:Vapor Gearbox (PKZ3327) & Vapor Main Motor (PKZ3316): +£13.59
Prop:Vapor Prop with Spinner (PKZ3302): +£2.18 (no stock)
Receiver:

AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel

Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)+£40.80
Spektrum AR6410L DSM2/DSMX 6CH Ultra Micro-Rx with Long Throw Servo£42.20
AR6410 DSM2/DSMX 6CH Ultra Micro-Rx (clone)+£26.20
detail
LiPo:Hyperion G3 70mAh Single Cell (3.7v) 25C: +£2.71
Glue:Deluxe Materials Roket Hot - 20g: +£4.89
Deluxe Materials Roket Rapid - 20g: +£4.89
Deluxe Materials Micro Tips and Tube: +£4.56


Kit Price: £ 28.80

Stevens Aero LiddleRod

This smooth-flying highly aerobatic indoor model is a pilot pleaser. With nimble handling and a wide flight envelope, the LiddleRod is a convincing aerobat, yet features forgiving handling. Large round loops, rolls, snaps, stall turns, Immelman turns, split-s, and cuban eight maneuvers are well within the scope of this easy to fly three channel aerobat designed for the Parkzone Vapor and Spektrum AR6400 receiver modules.

Beginners will appreciate the simple assembly, innovative self jigging components, and low parts count of this high quality balsa kit. Durable construction makes unintended encounters with the ground a non-event and damage is easily fixed at the field in seconds with thin CA glue.

A relaxed one evening build and aerobatic antics that will be the hit of your next indoor flying session, position the Stevens AeroModel LiddleRod as the seasons hottest indoor kit built model.

The kit includes a full-size plan with instructions. You may download a supplementary guide with step-by-step photos.

Recommended Flying Site:Gymnasium
Airframe Type:Basic Trainer
Control Layout:3 Channel R/E/T
Wing Span:14.75"
Wing Area:57 sq in.
Length:12.5"
Flying Weight:1.1oz
Loading:2.7 oz/sq ft
Receiver:Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410 (Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Power Unit:Parkzone PKZ3624 (P-51 Motor/Gearbox) plus EFL9051 (micro 4-Site prop)
Battery:120mAh single cell (EFLB1201S)
Pilot Skill Level:Intermediate
Builders Skill Level:Beginner

A number of options for Stevens Aero LiddleRod may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.

Motor:Parkzone P-51 Motor / Gearbox (PKZ3624): +£14.49
Propeller:

The 4-Site props (pack of 2) are preferred but, if out of stock, the GWS 5x3 with adapter is a good alternative.

E-flite Micro 4-Site Propeller with Spinner (pk of 2) (EFL9051): +£3.32 ea, quantity:
micro-speed 5x3 prop (black): +£0.81 ea, quantity:
1.5mm Push-On Prop Adapter: +£1.66
Receiver:

AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel

Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)+£40.80
Spektrum AR6410L DSM2/DSMX 6CH Ultra Micro-Rx with Long Throw Servo£42.20
AR6410 DSM2/DSMX 6CH Ultra Micro-Rx (clone)+£26.20
detail
LiPo:

LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.

Hyperion G3 130mAh 1S (3.7V) 25C£3.95
Intellect 130mAh 1S (3.7V) 25C (2 pack)£6.95
Hi-Energy 130mAh 1S (3.7V) 30C (2 pack)+£7.70
Reaction 150mAh 1S (3.7V) 20C+£2.45
Nano-Tech 160mAh 1S (3.7V) 20C+£2.30
detail
Glue:Deluxe Materials Roket Hot - 20g: +£4.89
Deluxe Materials Roket Rapid - 20g: +£4.89
Deluxe Materials Micro Tips and Tube: +£4.56



Kit Price: £ 39.60

Stevens Aero LiddleGee

Based on the LiddleRod 2.4 the LiddleGee puts a fresh face on this smooth-flying highly aerobatic indoor model. With nimble handling and a wide flight envelope, the LiddleGee 2.4 is a convincing aerobat, yet features forgiving handling not common in similarly sized aerobatic models. Large round loops, rolls, snaps, stall turns, Immelman turns, split-s, and cuban eight maneuvers are well within the scope of this easy to fly three channel aerobat (Rudder Elevator Throttle).

Beginners will appreciate the simple assembly, innovative self jigging components, and low parts count of this high quality balsa kit. Durable construction makes unintended encounters with the ground a non-event and damage is easily fixed at the field in seconds with thin CA glue.

The kit includes a full-size plan with instructions. You may download a supplementary guide with step-by-step photos.

Recommended Flying Site:Gymnasium
Airframe Type:Basic Trainer
Control Layout:3 Channel R/E/T
Wing Span:14.75"
Wing Area:57 sq in.
Length:12.5"
Flying Weight:1.1oz
Loading:2.7 oz/sq ft
Receiver:Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410 (Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Power Unit:Parkzone PKZ3624 (P-51 Motor/Gearbox) plus EFL9051 (micro 4-Site prop)
Battery:120mAh single cell (EFLB1201S)
Pilot Skill Level:Intermediate
Builders Skill Level:Beginner

A number of options for Stevens Aero LiddleGee may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.

Motor:Parkzone P-51 Motor / Gearbox (PKZ3624): +£14.49
Propeller:

The 4-Site props (pack of 2) are preferred but, if out of stock, the GWS 5x3 with adapter is a good alternative.

E-flite Micro 4-Site Propeller with Spinner (pk of 2) (EFL9051): +£3.32 ea, quantity:
micro-speed 5x3 prop (black): +£0.81 ea, quantity:
1.5mm Push-On Prop Adapter: +£1.66
Receiver:

AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel

Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)+£40.80
Spektrum AR6410L DSM2/DSMX 6CH Ultra Micro-Rx with Long Throw Servo£42.20
AR6410 DSM2/DSMX 6CH Ultra Micro-Rx (clone)+£26.20
detail
LiPo:

LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.

Hyperion G3 130mAh 1S (3.7V) 25C£3.95
Intellect 130mAh 1S (3.7V) 25C (2 pack)£6.95
Hi-Energy 130mAh 1S (3.7V) 30C (2 pack)+£7.70
Reaction 150mAh 1S (3.7V) 20C+£2.45
Nano-Tech 160mAh 1S (3.7V) 20C+£2.30
detail
Glue:Deluxe Materials Roket Hot - 20g: +£4.89
Deluxe Materials Roket Rapid - 20g: +£4.89
Deluxe Materials Micro Tips and Tube: +£4.56

Kit Price: £ 32.40

Stevens Aero PuddleBug

This charming model overflows with character and evokes fond memories of childhood free-flight designs. Well behaved in-flight manners with ample power on tap for stunting, the PuddleBug is certain to be the talk of your next indoor fly-in. Enter the world of Micro / Indoor flying with an easy to assemble precision laser cut model airplane designed for the Parkzone Vapor or Spektrum AR6400 receiver modules. Kit includes #2 Trexler inflatable balloon wheel.

Beginners will appreciate this affordable design, simple single surface wing, low parts count, and self jigging fuselage that builds straight every time. The gentle handling PuddleBug will not spin and stalls are always clean, predictable, and straight ahead. Slow speed, wide flight envelope, and forgiving handling keeps the new pilot from trouble and the low mass, durable, all balsa construction makes encounters with the ground a non-event. Should you find your PiddleBug requires repair; damage is easily fixed at the field in seconds with thin CA glue.

The kit includes a full-size plan with instructions. You may also download the PuddleBug supplementary build manual with step-by-step photos.

Recommended Flying Site:Gymnasium
Airframe Type:Basic Trainer
Control Layout:3 Channel R/E/T
Wing Span:17.75"
Wing Area:71 sq in.
Length:10.5"
Flying Weight:1.1oz (31gm)
Loading:2.2 oz/sq ft
Receiver:Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410 (Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Power Unit:Parkzone PKZ3624 (P-51 Motor/Gearbox) plus EFL9051 (micro 4-Site prop)
Battery:120mAh single cell (EFLB1201S)
Pilot Skill Level:Beginner
Builders Skill Level:Beginner

A number of options for Stevens Aero PuddleBug may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.

Motor:Parkzone P-51 Motor / Gearbox (PKZ3624): +£14.49
Propeller:

The 4-Site props (pack of 2) are preferred but, if out of stock, the GWS 5x3 with adapter is a good alternative.

E-flite Micro 4-Site Propeller with Spinner (pk of 2) (EFL9051): +£3.32 ea, quantity:
micro-speed 5x3 prop (black): +£0.81 ea, quantity:
1.5mm Push-On Prop Adapter: +£1.66
Receiver:

AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel

Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)+£40.80
Spektrum AR6410L DSM2/DSMX 6CH Ultra Micro-Rx with Long Throw Servo£42.20
AR6410 DSM2/DSMX 6CH Ultra Micro-Rx (clone)+£26.20
detail
LiPo:

LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.

Hyperion G3 130mAh 1S (3.7V) 25C£3.95
Intellect 130mAh 1S (3.7V) 25C (2 pack)£6.95
Hi-Energy 130mAh 1S (3.7V) 30C (2 pack)+£7.70
Reaction 150mAh 1S (3.7V) 20C+£2.45
Nano-Tech 160mAh 1S (3.7V) 20C+£2.30
detail
Glue:Deluxe Materials Roket Hot - 20g: +£4.89
Deluxe Materials Roket Rapid - 20g: +£4.89
Deluxe Materials Micro Tips and Tube: +£4.56


Kit Price: £ 49.80

Stevens Aero S-POU!

S-POU! inspired by the Pou De Ciel (Flying Flea) - Based on the flight mechanics of Henri Minet's Flying Machine this tandem wing DiddleBug explores pitch control of the main wing and provokes all kinds of ogling at local indoor events. Designed for the Parkzone Vapor or Spektrum AR6400 receiver modules.

Beginners will appreciate this affordable design, simple single surface wing, low parts count, and self jigging fuselage that builds straight every time. The gentle handling S-POU! will not spin and stalls are always clean, predictable, and straight ahead. Slow speed, wide flight envelope, and forgiving handling keeps the new pilot from trouble and the low mass, durable, all balsa construction makes encounters with the ground a non-event. Should you find your S-POU! requires repair; damage is easily fixed at the field in seconds with thin CA glue.

Recommended Flying Site:Gymnasium
Airframe Type:Basic Trainer
Control Layout:3 Channel R/E/T
Wing Span:17.75"
Wing Area:125 sq in.
Length:12"
Flying Weight:1.4oz (40gm)
Loading:1.6 oz/sq ft
Receiver:Parkzone PKZ3351 or Spektrum AR6400
Power Unit:Parkzone PKZ3624 (P-51 Motor/Gearbox) plus PKZ3601 (or PKZ3624 P-51 prop)
Battery:120mAh single cell (EFLB1201S)
Pilot Skill Level:Beginner
Builders Skill Level:Beginner

A number of options for Stevens Aero S-POU! may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.

Motor:Parkzone P-51 Motor / Gearbox (PKZ3624): +£14.49
Propeller:

The 4-Site props (pack of 2) are preferred but, if out of stock, the GWS 5x3 with adapter is a good alternative.

E-flite Micro 4-Site Propeller with Spinner (pk of 2) (EFL9051): +£3.32 ea, quantity:
micro-speed 5x3 prop (black): +£0.81 ea, quantity:
1.5mm Push-On Prop Adapter: +£1.66
Receiver:

AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel

Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)+£40.80
Spektrum AR6410L DSM2/DSMX 6CH Ultra Micro-Rx with Long Throw Servo£42.20
AR6410 DSM2/DSMX 6CH Ultra Micro-Rx (clone)+£26.20
detail
LiPo:

LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.

Hyperion G3 130mAh 1S (3.7V) 25C£3.95
Intellect 130mAh 1S (3.7V) 25C (2 pack)£6.95
Hi-Energy 130mAh 1S (3.7V) 30C (2 pack)+£7.70
Reaction 150mAh 1S (3.7V) 20C+£2.45
Nano-Tech 160mAh 1S (3.7V) 20C+£2.30
detail
Glue:Deluxe Materials Roket Hot - 20g: +£4.89
Deluxe Materials Roket Rapid - 20g: +£4.89
Deluxe Materials Micro Tips and Tube: +£4.56
Wheels:Du-Bro DB125MW 1.25" Mini Lite Wheels: +£3.75



Kit Price: £ 36.00

Stevens Aero SkyBuggy 100

This pint sized performer is based on the successful Stevens AeroModel SkyBuggy 300. Reduced in size and re-engineered to accept Parkzone Vapor and Spektrum AR6400 receiver modules The SkyBuggy 100 is right at home in your large backyard or sports hall. .

SkyBuggy 100 echos the nostalgic lines of the long since discontinued Andy Clancy Lazy Bee model line and features a refreshing splash of Kris Cartwright's own keen eye for design. When the above is combined with Stevens AeroModel's modern model engineering, clear and thoughtful instructions, and state of the industry cutting techniques the result is simply fantastic on all levels.

The Skybuggy 100 kit includes a full-size plan with instructions. You may also download the comprehensive assembly manual and photo supplement.

Recommended Flying Site:Gymnasium
Airframe Type:Sport
Control Layout:3 Channel R/E/T
Wing Span:19.5"
Wing Area:100 sq in.
Length:16"
Flying Weight:2oz (57gm)
Loading:2.9 oz/sq ft
Receiver:Parkzone PKZ3351, PKZ3352, PKZUA1151 or Spektrum AR6400/AR6410 (Tx mix or mode 4 required to use AR6400/AR6410 for rudder/aileron)
Power Unit:Parkzone PKZ3624 (P-51 Motor/Gearbox) plus EFL9051 (micro 4-Site prop)
Battery:120mAh single cell (EFLB1201S)
Pilot Skill Level:Beginner
Builders Skill Level:Beginner

A number of options for Stevens Aero SkyBuggy 100 may be purchased at discounted prices. Selecting an option will add its price to the total for the kit. So-Lite is ideal for covering.

Motor:Parkzone P-51 Motor / Gearbox (PKZ3624): +£14.49
Propeller:

The 4-Site props (pack of 2) are preferred but, if out of stock, the GWS 5x3 with adapter is a good alternative.

E-flite Micro 4-Site Propeller with Spinner (pk of 2) (EFL9051): +£3.32 ea, quantity:
micro-speed 5x3 prop (black): +£0.81 ea, quantity:
1.5mm Push-On Prop Adapter: +£1.66
Receiver:

AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel

Vapor DSM2/DSMX Rx/ESC/Servo Module (PKZ3352)+£40.80
Spektrum AR6410L DSM2/DSMX 6CH Ultra Micro-Rx with Long Throw Servo£42.20
AR6410 DSM2/DSMX 6CH Ultra Micro-Rx (clone)+£26.20
detail
LiPo:

LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.

Hyperion G3 130mAh 1S (3.7V) 25C£3.95
Intellect 130mAh 1S (3.7V) 25C (2 pack)£6.95
Hi-Energy 130mAh 1S (3.7V) 30C (2 pack)+£7.70
Reaction 150mAh 1S (3.7V) 20C+£2.45
Nano-Tech 160mAh 1S (3.7V) 20C+£2.30
detail
Glue:Deluxe Materials Roket Hot - 20g: +£4.89
Deluxe Materials Roket Rapid - 20g: +£4.89
Deluxe Materials Micro Tips and Tube: +£4.56
Wheels:Du-Bro DB150MW 1.5" Mini Lite Wheels: +£3.94



Kit Price: £ 55.20

Stevens Aero Swift 100

An exciting full-house aerobatic ultra-micro model from Stevens AeroModel. Quick building interlocking fully laser cut design features stellar lines and oozes vintage charm. The new Swift 100 the full house ultra micro that's not a "BEAST" to fly.

Swift is designed for a 2S brushless motor and Spektrum's AR6410LBL micro receiver with built-in brushless ESC. An alternative is to use the AR6400/AR6410 with an external brushless ESC.

Download the build manual and photo supplement.

Recommended Flying Site:Sports Hall, Small Field
Airframe Type:Aerobatic Trainer
Control Layout:4 Channel R/E/A/T
Wing Span:21"
Wing Area:92 sq in.
Length:17"
Flying Weight:3.1oz (52gm)
Loading:4.8 oz/sq ft
Receiver:Spektrum AR6400LBL
Aileron Servos:2 x Spektrum AS2000
Power Unit:A1504-18 with GWS 4.5x3 prop
Battery:120mAh 2S (EFLB1201S)
Pilot Skill Level:Intermediate
Builders Skill Level:Intermediate

The AR6400LBL uses non-industry standard connectors: JST-PH for the battery and a Molex connector for the motor. We have connectors and leads available (e.g.: battery lead, motor lead) or, instead, you could change the connectors for the more usual red JST battery connector and 2mm bullet connectors for the motor.

Motor:Budget Outrunner A1504-18 (2900Kv): +£11.88
Prop:micro-speed 4.5x3 prop (black): +£0.81 ea, quantity:
Receiver:

The 'AR6400 Clone' option includes an external 7A brushless ESC

Spektrum AR6410LBL DSMX 6CH Ultra Micro-Rx with Brushless ESC£45.55
AR6400 Clone & XP-7A ESC£38.65
detail
Servos:
2 x 'SuperMicro' Micro 1.4gm Linear Servo£14.80
2 x Spektrum AS2000L 1.7g Micro Long Throw Servo£31.90
detail
Servo Leads:

A Y lead is required when using AS2000 servos, 2 extension leads are required when using the SuperMicro servos

JST-SH Servo Y Lead (100mm)+£3.75
2 x JST-SH Servo Extension Lead (100mm)+£4.30
detail
LiPo:

These batteries are fitted with JST-PH 3 pin power connector

E-flite 120mAh 2S (7.4v) 20C£9.15
Hyperion G3 180mAh 2S (7.4v) 25C - UMX/JSTPH Conn+£7.95
E-flite 180mAh 2S (7.4v) 20C£13.20
Hyperion G3 240mAh 2S (7.4v) 25C - UMX/JSTPH Conn+£7.60
detail
Wheels:Du-Bro DB150MW 1.5" Mini Lite Wheels: +£3.94

A Customer's Model




Kit Price: £ 65.40


© Micron Radio Control