Micron R/C is open on Mondays, Tuesdays and Fridays. For further details, see opening times.
*** Please read this notice if your shipping address is outside the U.K. ***
Stevens Aero Micro Max
Print version
The 'microMax 103' captures the simple lines, easy construction and delightful performance of the home built full-size MiniMax. Designed for the Parkzone Vapor or Spektrum AR6400 receiver modules.
The Team Mini Max was designed by Wayne Ison and marketed through TEAM aircraft. This highly successful mid-wing strut braced single seat rag wing design found favor among many home builders. TEAM eventually folded but the design lives on and has shuffled around from business to business (currently being sold through www.teammini-max.com).
microMax is modelled on an older Mini Max three-view as published in Bill Hannan's Peanuts & Pistachios resource and it should be noted that this three-view deviates somewhat from current full scale production. Stevens Aero chose to keep these deviations as they lend a unique look to the aircraft and, being a home built design, there's great variance in completed airframes as each builder offers their unique twist on finishing items such as cowl, wing tips, and empennage.
The kit includes:
A number of options for Stevens Aero microMAX 103 may be purchased at discounted prices. Selecting an option will add its price to the total for the kit.
The 4-Site props (pack of 2) are preferred but, if out of stock, the GWS 5x3 with adapter is a good alternative.
AR6400 type receivers require either a mode 4 Tx or a Tx mix to map the aileron stick onto the rudder channel. The Futaba and Spektrum Micro receiver options comprises separate receiver and servos. Installation differs from that shown in the instructions for Vapor and AR64xx receivers - the servos are mounted on the fuselage wall using the supplied servo mounting tape.
LiPo cannot be sent within the UK without an accompanying electronic device (e.g. receiver). LiPo cannot be sent at all via airmail and must use a road carrier. Please contact us to get a shipping quotation if you wish to add a LiPo. See LiPo shipping for details.
Only required if you wish to substitute for the plastic wheels included in the kit
There are currently 0 options selected. Click deselect to cancel all option selections.
