*** Please read this notice about shipping charges and VAT if your delivery address is outside the U.K. ***

Micron MR601 Configuration Table 1.5 for Firmware Version 1.5

The pre-loaded configurations are shown below. Unless otherwise specified when the receiver was ordered, config 1 is enabled by default. The other loaded configurations can be selected using a power-on configuration change or by programming.

Configurations

This configuration table is for firmware version 1.5. For other versions, refer to mr6xx_version.

The pre-loaded configurations are shown below. Unless otherwise specified when the receiver was ordered, config 1 is enabled by default. The other loaded configurations can be selected using a power-on configuration change or by programming.

Port 1: Centre-off throttle 2: MyLocoSound triggers on A & B (Tx22) 3: MyLocoSound triggers on A & B 4: Road Vehicle
H1 Centre-Off ch1 Centre-Off ch1 Centre-Off ch1 Centre-Off ch3
P1 Forward Light on H1 (LED2) Forward Light on H1 (LED2) Forward Light on H1 (LED2) Servo on ch2
Steering
P2 Reverse Light on H1 Reverse Light on H1 Reverse Light on H1 Left indicator activate=ch4, steer=ch2 (LED2)
P3 Momentary on ch3, low 3.3V Momentary on ch3, low 3.3V Momentary on ch3, low 3.3V Right indicator
F1/A/P4 Forward Light on H1 Momentary on ch3, high closed Momentary on ch2, low closed Brake Light on H1
F2/B/P5 Reverse Light on H1 Momentary on ch3, low closed Momentary on ch4, low closed Reverse Light on H1
LED2 P1P1P1P2
Selecta Enabled Enabled Disabled Disabled
LVC Disabled Disabled Disabled Disabled
Sleep time 1 hour 1 hour 1 hour 1 hour
Cruise Enabled Enabled Enabled Enabled
© Micron Radio Control